Wood deck restoration can be an easy – or a more involved – task, depending on the age and state of your wooden deck. As we mentioned earlier, rebuilding your deck back to like-new quality can be a simple or a complex process, depending on its current state. If your wooden deck is just a few years old, then perhaps just a thorough cleaning and a new coat of stain with hand brushes will restore it to it is previous splendor. There is no way to test the timing for painting or staining your deck’s wood, as the deck finish will appear to be good for some time, even when the wood is overly damp.
Even when staining or sealing wood decks, the boards may still crack and chip, making your deck appear older and more worn. Wood decks should be cleaned and stained throughout their lifespan to minimize major damage, such as graying, splitting, cracking, buckling, and rotting. The deck stripper is charged with going deep into the wood to strip away the prior stain, and, in the process, opening up the pores in the wood. A deck stripper works by penetrating the old finish and/a weakening the bonds between wood cells and stain.
It is effective at removing the iron stains and the brown-black tannins which often appear on decks made of cedar and redwood. Sanding and stripping is a commonly used technique for removing undesirable finishes from a decking or other wood surfaces, particularly if there has been a lot of staining over the years, and the grain is no longer visible and looks like painted wood. With Deck Stripping, chemicals are used to strip/remove existing finishes off decks or other wood surfaces outdoors. As its name suggests, deck stripping is the process of stripping the oils or stains off of wood back to it is the natural state.
By applying deck stripping products to the surface of the wood, the products will seal any cracks, holes, and other imperfections. Deck paint restoration products are thick enough to fill in any cracks, knotholes, and spall, and provide an entirely new, texture-filled surface that may last up to 13 years without additional applications. Deck restores painting restoration coatings are made with long-lasting, color-safe acrylic base materials that are UV-inhibited, and they add a hardening agent (aluminum oxide or sand). Simply stain your old wood deck with thick, deck restores acrylic coating, and it creates a smooth finish that will last years.
It is important to realize that deck restoration paint cannot do wonders to a surface that has reached some level of wood decay. Painting a restoration product over a deck may sound like a quick and easy job, but it could take a fair amount of time. If you think that your old deck still has a little life left in it, there are several tasks you will have to do to prepare your surface for restoration. Learning how to stain your deck is just a matter of following some simple steps, like giving adequate drying time between cleaning and staining your wood.
When it comes to deck refinishing, the process includes cleaning, stripping, power-washing, inspecting, repair, sanding, staining, and sealing. Also, full-scale deck refinishing needs to happen every 3-5 years — depending on what kind of stain/finish was applied previously on a wooden deck. A deck rejuvenation project such as this one can be completed in just two days, but you are better off spreading out the work across two weekends so the wood is fully dry before applying the stain. You could even speed up the application by using a paint roller to spread the stain across your deck boards.
Because you are applying deck stain with these thick coats, it takes a fair amount longer for them to dry compared to thinner paints or even thinner stains. The primary reason why deck resurfacers perform so well for their intended purposes is that they are so thick, compared to paints or stains. Because these products are so thick and designed to conceal wood, manufacturers can offer them in an array of different, universal shades. While far thicker than paint or stain, it is important to realize that most deck restorers require at least two coats to add life back to an aging, worn-out deck.
Before leaving the shop, purchase a manufacturer’s recommended deck cleaner to make sure the deck coating is compatible. For best results in deck restoration, clean the covering during spring and fall using the manufacturer’s cleaner. Thoroughly wash your deck after using this chemical, as it may chew through wood, leading to discoloration and premature graying. Oxalic acid is not effective against mildew, so you might want to use it after cleaning your deck with a bleach-based cleaner.
Go over the deck with a stiff-bristled brush to get its cleaning solution in the wood fibers, and rinse off. Once the work is completely cleaned, the cleaning agent used for removing mold is sprayed all over to make sure that the wood is completely cleaned, and Deck Solutions does not re-seal the mold in the future. Before applying a restoration product, allow the wood to dry for one week and cover all vertical surfaces with masking tape.
By pre-pressure washing your home’s deck, you will ensure that your stain and sealant will adhere best to your wooden deck. Overspray from the Eco-Wood Treatment is not much of an issue, but like with Deck Stain or Deck Paint, it does leave a film behind glass and vinyl siding. Keep in mind, before committing to using deck stain products, that this permanently changes the appearance of the deck, hiding wood grain, and giving it a more synthetic-looking appearance similar to some composite deck products.
